Run more tests every day

The Fluke 6500-2 PAT tester is a compact lightweight solution that works at the touch of a button. This instrument has brought a new dimension to automatic testing capabilities, helping you test more portable devices per day. The 6500-2 is designed to let you work faster, without compromising test results.

One-touch solution...

The pre-programmed test routines are performed at the touch of a button. This simplifies testing and also enables faster, more efficient operation. The fully automatic 6500-2 also allows the user to define his/her own test routines, and features a QWERTY keyboard for fast data entry.

Light...

The 6500-2 weighs only about 3 kg; it is therefore light and therefore easy to carry when working on site. The robust carrying case (included) not only provides protection during transport, but also additional storage space for accessories and other instruments.

Small...

In addition, this portable equipment tester is also extremely compact and as robust as you have come to expect from Fluke, making it suitable for on-site work. A Fluke PAT tester comes with all the features you need for portable equipment testing, making it a complete all-in-one solution.

Specifications
Test specifications	Display range accuracy is defined as ±(% of reading + number of counts) at 23 °C ±5 °C, ≤75% RH.
	Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy (0.1 x specified accuracy) per °C may deteriorate.
	The accuracies for the measuring ranges comply with standards EN61557-1: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2.
Switch-on test	When switched on, the tester shows an interrupted safety ground connection and measures mains voltage and frequency.
	Display range	90 V to 264 V
	Accuracy at 50 Hz	± (2% + 3 counts)
	Resolution	0,1 V
	Input impedance	> 1 MΩ // 2.2 nF
	Maximum mains input voltage	264 V
Protection line test (R pe)	Display range	0 to 19.99 Ω
	Accuracy (after test lead compensation)	± (2.5% + 4 counts)
	Resolution	0,01 Ω
	Test current	200 mA AC -0% +40% in 1.99 Ω 25 A AC ± 20% in 25 mΩ at 230 V
	No-load voltage	> 4 V AC, < 24 V AC
	Test lead compensation for protective conductor test	Can subtract up to 1.99 Ω
Insulation test (R iso)	Display range	0 to 299 MΩ
	Accuracy	± (5% + 2 counts) from 0.1 to 300 MΩ
	Resolution	0.01 MΩ (0 to 19.99 MΩ) 0.1 MΩ (20 to 199.9 MΩ) 1 MΩ (200 to 299 MΩ)
	Test voltage	500 V DC -0% + 25% at 500 kΩ load or 250 V DC -0% +25% at 250 kΩ load
	Test current	> 1 mA at 500 kΩ load, < 15 mA at 0 Ω
	Auto-discharge time	< 0.5 s for 1 μF
	Max. Capacitive load	Operates up to 1 μF
Touch current test	Display range	0 to 1.99 mA AC
	Accuracy	± (4% + 2 counts)
	Resolution	0.01 mA
	Internal resistance (via probe)	2 kΩ
	Measurement method	Probe*
Replacement leakage current test	Display range	0 to 19.99 mA AC
	Accuracy	± (2.5% + 3 counts)
	Resolution	0.01 mA
	Test voltage	100 V AC ± 20%
Load/leakage current test: load current	Display range	0 A to 16 A
	Accuracy	± (4% + 2 counts)
	Resolution	0,1 A*
Load/leakage current test: load current	Display range Mains voltage 230 V	0.0 VA to 3.7 kVA
	Accuracy	± (5% + 3 counts)
	Resolution	1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)*
Load/leakage current test	Display range	0 to 19.99 mA
	Accuracy	± (4% + 4 counts)
	Resolution	0.01 mA*
PELV test	Accuracy at 50 Hz	± (2% + 3 counts)
	Surge protector	300 V RMS
	Alert threshold	25 V RMS
RCCB test: tripping current	Usage measurement error	±10%
	Nominal	30 mA
	Accuracy	±5%
Earth leakage switch test: tripping time	Standard requirement	61557 part 6; tolerance of nominal test current 0% to +10%
	Usage measurement error	±10%
	Type of earth leakage switch	Universal AC 30 mA
	Display range	310 ms
	Resolution	0.1 ms
	Accuracy	3 ms
	Limit value for tripping time at 100% (30 mA)	300 ms
	Limit switch-off time at 500% (150 mA)	40 ms
*The device under test is powered from the mains.

Environmental specifications
Operating temperature	0 to 40 °C
Relative humidity	Non-condensing < 10 °C 95% from 10 to 30 °C 75% from 30 to 40 °C

Safety specifications
Safety specification	Complies with EN61010-1 3rd edition
	CAT II, 300 V, pole 2

Mechanical and general specifications
Dimensions	200 mm (L) x 275 mm (W) x 114 mm (H)
Weight	3.13 kg
Nutrition	230 V +10% -15%, 50 Hz ±2 Hz or (6500-2 only: 110 V +10% -15%,50 Hz ±2 Hz)
Power consumption (tester)	Normal 13 W (idle) Max. 60 W during protective conductor test with 25 A
Storage	Temperature	-10 to 60 °C
	Corrosion resistance	70 °C at 95% RH for max. 5 days
Operating height	0 to 2000 m
Seal	IP-40 (housing), IP-20 (connectors)
EMC	Complies with EN61326-1, portable
EMI insensitivity	3 V/m